Na}{

File Content: `index.js`

import applyStyle, { applyStyleOnLoad } from './applyStyle';
import computeStyle from './computeStyle';
import arrow from './arrow';
import flip from './flip';
import keepTogether from './keepTogether';
import offset from './offset';
import preventOverflow from './preventOverflow';
import shift from './shift';
import hide from './hide';
import inner from './inner';

/**
 * Modifier function, each modifier can have a function of this type assigned
 * to its `fn` property.<br />
 * These functions will be called on each update, this means that you must
 * make sure they are performant enough to avoid performance bottlenecks.
 *
 * @function ModifierFn
 * @argument {dataObject} data - The data object generated by `update` method
 * @argument {Object} options - Modifiers configuration and options
 * @returns {dataObject} The data object, properly modified
 */

/**
 * Modifiers are plugins used to alter the behavior of your poppers.<br />
 * Popper.js uses a set of 9 modifiers to provide all the basic functionalities
 * needed by the library.
 *
 * Usually you don't want to override the `order`, `fn` and `onLoad` props.
 * All the other properties are configurations that could be tweaked.
 * @namespace modifiers
 */
export default {
  /**
   * Modifier used to shift the popper on the start or end of its reference
   * element.<br />
   * It will read the variation of the `placement` property.<br />
   * It can be one either `-end` or `-start`.
   * @memberof modifiers
   * @inner
   */
  shift: {
    /** @prop {number} order=100 - Index used to define the order of execution */
    order: 100,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: shift,
  },

  /**
   * The `offset` modifier can shift your popper on both its axis.
   *
   * It accepts the following units:
   * - `px` or unit-less, interpreted as pixels
   * - `%` or `%r`, percentage relative to the length of the reference element
   * - `%p`, percentage relative to the length of the popper element
   * - `vw`, CSS viewport width unit
   * - `vh`, CSS viewport height unit
   *
   * For length is intended the main axis relative to the placement of the popper.<br />
   * This means that if the placement is `top` or `bottom`, the length will be the
   * `width`. In case of `left` or `right`, it will be the `height`.
   *
   * You can provide a single value (as `Number` or `String`), or a pair of values
   * as `String` divided by a comma or one (or more) white spaces.<br />
   * The latter is a deprecated method because it leads to confusion and will be
   * removed in v2.<br />
   * Additionally, it accepts additions and subtractions between different units.
   * Note that multiplications and divisions aren't supported.
   *
   * Valid examples are:
   * ```
   * 10
   * '10%'
   * '10, 10'
   * '10%, 10'
   * '10 + 10%'
   * '10 - 5vh + 3%'
   * '-10px + 5vh, 5px - 6%'
   * ```
   * > **NB**: If you desire to apply offsets to your poppers in a way that may make them overlap
   * > with their reference element, unfortunately, you will have to disable the `flip` modifier.
   * > You can read more on this at this [issue](https://github.com/FezVrasta/popper.js/issues/373).
   *
   * @memberof modifiers
   * @inner
   */
  offset: {
    /** @prop {number} order=200 - Index used to define the order of execution */
    order: 200,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: offset,
    /** @prop {Number|String} offset=0
     * The offset value as described in the modifier description
     */
    offset: 0,
  },

  /**
   * Modifier used to prevent the popper from being positioned outside the boundary.
   *
   * A scenario exists where the reference itself is not within the boundaries.<br />
   * We can say it has "escaped the boundaries" — or just "escaped".<br />
   * In this case we need to decide whether the popper should either:
   *
   * - detach from the reference and remain "trapped" in the boundaries, or
   * - if it should ignore the boundary and "escape with its reference"
   *
   * When `escapeWithReference` is set to`true` and reference is completely
   * outside its boundaries, the popper will overflow (or completely leave)
   * the boundaries in order to remain attached to the edge of the reference.
   *
   * @memberof modifiers
   * @inner
   */
  preventOverflow: {
    /** @prop {number} order=300 - Index used to define the order of execution */
    order: 300,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: preventOverflow,
    /**
     * @prop {Array} [priority=['left','right','top','bottom']]
     * Popper will try to prevent overflow following these priorities by default,
     * then, it could overflow on the left and on top of the `boundariesElement`
     */
    priority: ['left', 'right', 'top', 'bottom'],
    /**
     * @prop {number} padding=5
     * Amount of pixel used to define a minimum distance between the boundaries
     * and the popper. This makes sure the popper always has a little padding
     * between the edges of its container
     */
    padding: 5,
    /**
     * @prop {String|HTMLElement} boundariesElement='scrollParent'
     * Boundaries used by the modifier. Can be `scrollParent`, `window`,
     * `viewport` or any DOM element.
     */
    boundariesElement: 'scrollParent',
  },

  /**
   * Modifier used to make sure the reference and its popper stay near each other
   * without leaving any gap between the two. Especially useful when the arrow is
   * enabled and you want to ensure that it points to its reference element.
   * It cares only about the first axis. You can still have poppers with margin
   * between the popper and its reference element.
   * @memberof modifiers
   * @inner
   */
  keepTogether: {
    /** @prop {number} order=400 - Index used to define the order of execution */
    order: 400,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: keepTogether,
  },

  /**
   * This modifier is used to move the `arrowElement` of the popper to make
   * sure it is positioned between the reference element and its popper element.
   * It will read the outer size of the `arrowElement` node to detect how many
   * pixels of conjunction are needed.
   *
   * It has no effect if no `arrowElement` is provided.
   * @memberof modifiers
   * @inner
   */
  arrow: {
    /** @prop {number} order=500 - Index used to define the order of execution */
    order: 500,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: arrow,
    /** @prop {String|HTMLElement} element='[x-arrow]' - Selector or node used as arrow */
    element: '[x-arrow]',
  },

  /**
   * Modifier used to flip the popper's placement when it starts to overlap its
   * reference element.
   *
   * Requires the `preventOverflow` modifier before it in order to work.
   *
   * **NOTE:** this modifier will interrupt the current update cycle and will
   * restart it if it detects the need to flip the placement.
   * @memberof modifiers
   * @inner
   */
  flip: {
    /** @prop {number} order=600 - Index used to define the order of execution */
    order: 600,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: flip,
    /**
     * @prop {String|Array} behavior='flip'
     * The behavior used to change the popper's placement. It can be one of
     * `flip`, `clockwise`, `counterclockwise` or an array with a list of valid
     * placements (with optional variations)
     */
    behavior: 'flip',
    /**
     * @prop {number} padding=5
     * The popper will flip if it hits the edges of the `boundariesElement`
     */
    padding: 5,
    /**
     * @prop {String|HTMLElement} boundariesElement='viewport'
     * The element which will define the boundaries of the popper position.
     * The popper will never be placed outside of the defined boundaries
     * (except if `keepTogether` is enabled)
     */
    boundariesElement: 'viewport',
    /**
     * @prop {Boolean} flipVariations=false
     * The popper will switch placement variation between `-start` and `-end` when
     * the reference element overlaps its boundaries.
     *
     * The original placement should have a set variation.
     */
    flipVariations: false,
    /**
     * @prop {Boolean} flipVariationsByContent=false
     * The popper will switch placement variation between `-start` and `-end` when
     * the popper element overlaps its reference boundaries.
     *
     * The original placement should have a set variation.
     */
    flipVariationsByContent: false,
  },

  /**
   * Modifier used to make the popper flow toward the inner of the reference element.
   * By default, when this modifier is disabled, the popper will be placed outside
   * the reference element.
   * @memberof modifiers
   * @inner
   */
  inner: {
    /** @prop {number} order=700 - Index used to define the order of execution */
    order: 700,
    /** @prop {Boolean} enabled=false - Whether the modifier is enabled or not */
    enabled: false,
    /** @prop {ModifierFn} */
    fn: inner,
  },

  /**
   * Modifier used to hide the popper when its reference element is outside of the
   * popper boundaries. It will set a `x-out-of-boundaries` attribute which can
   * be used to hide with a CSS selector the popper when its reference is
   * out of boundaries.
   *
   * Requires the `preventOverflow` modifier before it in order to work.
   * @memberof modifiers
   * @inner
   */
  hide: {
    /** @prop {number} order=800 - Index used to define the order of execution */
    order: 800,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: hide,
  },

  /**
   * Computes the style that will be applied to the popper element to gets
   * properly positioned.
   *
   * Note that this modifier will not touch the DOM, it just prepares the styles
   * so that `applyStyle` modifier can apply it. This separation is useful
   * in case you need to replace `applyStyle` with a custom implementation.
   *
   * This modifier has `850` as `order` value to maintain backward compatibility
   * with previous versions of Popper.js. Expect the modifiers ordering method
   * to change in future major versions of the library.
   *
   * @memberof modifiers
   * @inner
   */
  computeStyle: {
    /** @prop {number} order=850 - Index used to define the order of execution */
    order: 850,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: computeStyle,
    /**
     * @prop {Boolean} gpuAcceleration=true
     * If true, it uses the CSS 3D transformation to position the popper.
     * Otherwise, it will use the `top` and `left` properties
     */
    gpuAcceleration: true,
    /**
     * @prop {string} [x='bottom']
     * Where to anchor the X axis (`bottom` or `top`). AKA X offset origin.
     * Change this if your popper should grow in a direction different from `bottom`
     */
    x: 'bottom',
    /**
     * @prop {string} [x='left']
     * Where to anchor the Y axis (`left` or `right`). AKA Y offset origin.
     * Change this if your popper should grow in a direction different from `right`
     */
    y: 'right',
  },

  /**
   * Applies the computed styles to the popper element.
   *
   * All the DOM manipulations are limited to this modifier. This is useful in case
   * you want to integrate Popper.js inside a framework or view library and you
   * want to delegate all the DOM manipulations to it.
   *
   * Note that if you disable this modifier, you must make sure the popper element
   * has its position set to `absolute` before Popper.js can do its work!
   *
   * Just disable this modifier and define your own to achieve the desired effect.
   *
   * @memberof modifiers
   * @inner
   */
  applyStyle: {
    /** @prop {number} order=900 - Index used to define the order of execution */
    order: 900,
    /** @prop {Boolean} enabled=true - Whether the modifier is enabled or not */
    enabled: true,
    /** @prop {ModifierFn} */
    fn: applyStyle,
    /** @prop {Function} */
    onLoad: applyStyleOnLoad,
    /**
     * @deprecated since version 1.10.0, the property moved to `computeStyle` modifier
     * @prop {Boolean} gpuAcceleration=true
     * If true, it uses the CSS 3D transformation to position the popper.
     * Otherwise, it will use the `top` and `left` properties
     */
    gpuAcceleration: undefined,
  },
};

/**
 * The `dataObject` is an object containing all the information used by Popper.js.
 * This object is passed to modifiers and to the `onCreate` and `onUpdate` callbacks.
 * @name dataObject
 * @property {Object} data.instance The Popper.js instance
 * @property {String} data.placement Placement applied to popper
 * @property {String} data.originalPlacement Placement originally defined on init
 * @property {Boolean} data.flipped True if popper has been flipped by flip modifier
 * @property {Boolean} data.hide True if the reference element is out of boundaries, useful to know when to hide the popper
 * @property {HTMLElement} data.arrowElement Node used as arrow by arrow modifier
 * @property {Object} data.styles Any CSS property defined here will be applied to the popper. It expects the JavaScript nomenclature (eg. `marginBottom`)
 * @property {Object} data.arrowStyles Any CSS property defined here will be applied to the popper arrow. It expects the JavaScript nomenclature (eg. `marginBottom`)
 * @property {Object} data.boundaries Offsets of the popper boundaries
 * @property {Object} data.offsets The measurements of popper, reference and arrow elements
 * @property {Object} data.offsets.popper `top`, `left`, `width`, `height` values
 * @property {Object} data.offsets.reference `top`, `left`, `width`, `height` values
 * @property {Object} data.offsets.arrow] `top` and `left` offsets, only one of them will be different from 0
 */
Name	Size	Permission
applyStyle.js	2752 bytes	0644
arrow.js	3262 bytes	0644
computeStyle.js	4016 bytes	0644
flip.js	5094 bytes	0644
hide.js	1207 bytes	0644
index.js	14372 bytes	0644
inner.js	922 bytes	0644
keepTogether.js	895 bytes	0644
offset.js	5943 bytes	0644
preventOverflow.js	2849 bytes	0644
shift.js	999 bytes	0644
Command Bosku:

File Content: index.js

File Content: `index.js`
